transtainer aviation

Transtainer Aviation Fuel Containers - Series HSLS

The HSLS Series Intermediate Bulk Containers are specifically designed for the
transportation, storage and decanting of aviation fuel.

Size range is 500, 1000, 1250, 1500 and 1850 litre capacity

Specification :

• Full stainless steel construction.
• Square shape and standard pallet size optimise space requirements for both
transportation and warehousing.
• Combination manhole incorporating 150mm inspection hatch, pressure
venting, vacuum venting and emergency venting via fusible link in the event
of fire is fitted to the top cover.
• 460mm diameter Pressure Manway allows access during internal inspection,
cleaning or maintenance.
• Top Fill via full length fill tube terminating in a 2” NATO Camlock adaptor and
dust cap and comes complete with pressure equalisation drilling.
• Bottom discharge assembly and low point sample drain valve are housed
behind a lockable security cover. Designed to dispense product via gravity
or be aided by a pump set for rapid decanting.
• The 2” bottom discharge valve is offset with a 25mm rise pipe extending
through the base to minimise drawing off of contaminants that may have
settled.
• UN31A/Y Dangerous Goods Approved for the transport of Class 3 flammable
liquids by road rail and sea when used in accordance with the UN Model
Regulations for the Transport of Dangerous Goods, IMO IMDG Code, ADR
and ADG Codes.
• The UN31A/Y marketing and our UN Packaging Approval 3436 are of world
wide approval.
• Designed to be bottom lifted with fork trucks or top lifted with slings.

Safety Features:
• Self supporting tank with 32mm radius
corners for maximum service life.
• Fully enclosed forklift pockets for operator
safety.
• Protective guards surround the discharge
valve for safety.
• Full length fill tube for safety when filling
Class 3 liquids.
• Pressure, vacuum and temperature
relieving sized in accordance with
AS1940.
• Teflon seals for maximum chemical
compatibility.
• Stacking ring (coaming) offering protection
to all top fittings for safety.
• Reinforced heavy duty lifting lugs for
safety and service life.

Standard Equipment:
• Discharge: 2” ball valve c/w Camlocks
• Sample point: 0.75” ball valve c/w
Camlocks
• Fill: 2” fill tube c/w Camlocks
• Pressure Venting: 21kPa
• Vacuum Venting: -3.5kPa
• Temperature Relief: 138 degrees
Celsius

Materials:
• Shell: 3mm stainless plate
• Skid Assembly: 3-8mm stainless plate
• Camlocs: Aluminium
• Valves: Stainless Steel
• Gaskets: Teflon
• Weather-shield: Aluminium